Emtek EMTouch Classic Style Electronic Keypad Deadbolt L User Manual

ASSA ABLOY, the global leader in door opening solutionsInstallation & Programming GuideEMTouch™ & EMTouch™ Classic StyleElectronic Deadbolt Lo

10How to ProgramProgramming Your LockIn order to perform each of the following six functions, the lock must rst be placed in Programming Mode:*If no

11IN8-EMTOUCHDB 06/24/2013U.S. patent: 8,141,400International patents pending.Restoring the Lock to Factory Default Setting• Press and hold EMTEK but

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.Copyright © 201

24c4d23ITEM NO. DESCRIPTION QTY.1 Key 22 Outside Trim Plate Assembly 13 Deadbolt Latch Assembly 2 3/8” or 2 ¾” Backset 14 Inside Trim Plate Assembly 1

32-3/8” or 2-3/4” Backset2 1/8” Diameter Bore1/8” Deep2 ¼”1 “1” Diameter Edge Bore2. Door Jamb Prep1. Door PrepPreparation Step 1: Fasten Securi

4Scan this QR code for details.Fasten Latch using two #8 x ¾” Wood Screws (item #6).2. Remove Screws from Inside Trim Plate1. Install LatchHow to Inst

53. Install Outside Trim Plate Assembly4. Install Inside ChassisPosition the Outside Trim Plate Assembly through the bore hole.!Fit Flat Shaft through

64. Install Inside ChassisStep 2: Feed the Wire Harness through Inside Chassis.Step 3: Fasten Inside Chassis using two #8-32 x 1½” Flat Head Machine

7Step 4: Connect Wire Harness (A) and tuck Connectors as shown (B).ABStep 5: Install Battery.For optimal performance, always use a good quality bat

8*Unlocked position is required for installation and removal of the Inside Trim Plate Assembly.*UnlockedCorrect for installationLocked Screws (item #

9Your Emtek lock is shipped with two 4-digit user codes and a 6-digit programming code. These codes are randomly generated at the factory. (Turn to ne